User's Manual

Table Of Contents

Field Name Description

Select DSL Latency Select the level of DSL latency. Options are:

l Path0 Fast: No error correction and can provide lower latency on error-free

lines.

l Path1 Interleaved: Error checking that provides error-free data which

increases latency.

Select Scheduler for

Queues of Equal Pre-

cedence as the

Default Queue

Select an algorithm for applying queue data priority. Options are:

l Weighted Round Robin: Time slices are assigned to each process in equal por-

tions and in circular order, handling all processes without priority (also known

as cyclic executive).

l Weighted Fair Queuing: A data packet scheduling technique allowing dif-

ferent scheduling priorities to be assigned to statistically multiplexed data

flows. Since each data flow has its own queue, an ill-behaved flow (that sent

larger packets or more packets per second than the others since it became

active) will only affect itself and not other sessions.

Default Queue

Weight

Enter a default weight of the specified queue. Options are:

Default Queue Pre-

cedence

Enter a precedence for the specified queue. Options are:

ETH Interface

If you are using a gateway that is Ethernet-specific (non-DSL), you may want to configure an ETH interface to manage communication.

Most models support Ethernet and can be configured for Ethernet and DSL at the same time. Your gateway has four LAN ports. One

of them can be re-purposed to become an RJ45 WAN port when needed.

On this page, you can configure an Ethernet interface for your gateway.

1. In the left navigation bar, click Advanced Setup > Layer2 Interface > ETH Interface.

2. If no WAN port is configured, the Add button appears. Click Add.