User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 115
1. In the left navigation bar, click Diagnostics > Diagnostics. The following page appears.
2. To refresh the data, click Test at the bottom of the page. The normal test method is initiated, utilizing OAM F5 loopback
cells. The table is updated with fresh diagnostic information about connection integrity.
To learn more about what is being tested and what actions to take when a test fails, click the Help link at the far right of
each line item.
3. To test at the VP level in lieu of at an individual VC connection, click Test With OAM F4. Status is shown for both wireless
bands in the Test your Wireless Connection row.
4. To view information about other connections, click the Next Connection and Previous Connection buttons to navigate
through them.
Ethernet OAM
On this page, you can view diagnostics regarding your VDSL PTM or Ethernet WAN connection. Fault Management is compliant with
IEEE 802.1ag for Connectivity Fault Management.