User's Manual

SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2017 99
2. Fill in the fields, using the information in the field description table below.
3. Click Apply/Save to save the settings.
The fields on this page are explained in the following table.
Field Name Description
RADIUS Server IP
address
Enter the IP address of the RADIUS (Remote Authentication Dial In User Service) server asso-
ciated with your network.
RADIUS Port Enter the port number for the RADIUS server. Port
1812
is the current standard for RADIUS
authentication per the IETF RFC 2865. Older servers may use port
1645
. Options are
1
-
65535
.
RADIUS Key (
Optional
) Enter the encryption key (if required) needed to authenticate to the specified
RADIUS Server.
WEP Encryption Wired Equivalent Privacy (WEP) encryption mode is enabled by default and cannot be
changed.
Encryption
Strength
Select the length of the encryption method. Options are
128-bit
and
64-bit
. 128-bit is the
more robust option for security.
Current Network
Key
Select which of the four keys is presently in effect.
Network Key 1-4 Enterone or two encryption keys using the on-screen instructions to achieve the desired secur-
ity strength (128-bit or 64-bit).