User Manual

WPS Method
If the device you wish to connect to the Internet via your gateway supports the WPS secure WiFi connection method, follow these
steps.
1. In the left navigation bar, click Wireless > Security.
2. Select Enable WPS and click Apply/Save to commit your selection.
3. Within 2 minutes, activate WPS on the 3rd party device to which you wish to connect. The device may have a pushbutton
on its exterior or a software interface is used to initiate WPS connection. To learn how to use the WPS feature on your
client device, refer to its documentation.
Your device should now be connected to your gateway wirelessly using WPS. If you encounter problems with the WPS setup such as
connection failure, refer to your client device for further instructions.