User's Manual

ADSL MODEM USER MANUAL
- 9 -
Figure 2.2
2.3.4 ADSL MODEM WORK MODE CONFIGURATION
1． For different protocols, the users need to set ADSL Modem accordingly as listed below:
Table 2.2
PPPoE
PPPoA
PVC
Protocol
Use DNS
User Name
Password
√
PPPoE
Enable
√
√
√
PPPoA
Enable
√
√
1483 Bridged
PVC
Default route
√
Disable
Note: √ means configure according to ADSL service provider’s instructed value.
PPPoE can also be realized via third party dialup software.
User Manual
Reference Chapter
PPPoE
PPPoA
1483 Bridged
3.3
3.3
3.2
2． After getting through every page for parameters set-up, click “save” to save the value in ADSL MODEM
3． Click the “SysRestar” on “Maintenance” Tab to enter the page as Figure 2.3.You can choose “Current
Settings” and Click “Restart” button to reboot the ADSL MODEM.(You can also choose the “factory
default settings” in order to restart the modem to default configuration.)
Figure 2.3