User's Manual

DSL Gateway/Router — User Manual
Page 9 Total 20 Pages
3.4.2 RFC1483 BRIDGE CONFIGURATION
Select the Bridging mode. Then press “Next” to specify the Service Name, and select the “Enable Service” as
Figure 3.5.
Figure 3.5
Press “Next” to enter into “WAN configuration”, click “save” to save configuration, if you need to modify
the parameter, click “back” as Figure 3.6.
Figure 3.6
Note ： When you use bridge mode, please close “DHCP SERVER”, the result as Figure 3.7