Use and Care Guide

VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
EN
Step 11. Connect the
fountain nozzle to the top
of the extension tube.
Step 12. Place the
assembled lter kit in
water.
Step 13. Connect the
pump into a properly
grounded electrical
outlet.
NOTE: If the diverter
valve was used, you can
adjust the ow control as
needed.
13
12
11
PUMP PERFORMANCE
Pump Specifications
Max Flow Rate
275-GPH at 1-ft height
Power Consumption
23-watts / 0.4-amps
MAINTENANCE
• Occasional cleaning of the lter pads will be necessary to
ensure the proper functioning of the lter. The coarse lter pad
is a designed to trap large debris. The ne lter pad catches
smaller particles. All pads should be removed and washed with
clean water when they are visibly soiled - for best results, clean
the lter pads weekly.
• Before cleaning, always disconnect the pump from the power
source.
• Filter pads should be replaced annually. Use smartpond
®
Replacement Filter Pads model #MFRP or #MFRPCA.
6