Use and Care Guide

CAUTION

• This pump has been evaluated for use with fresh water only.

• Use a proper power source as indicated on the pump label.

• Keep the cord away from high temperatures or other heat sources.

• Do not pump heated liquids.

• Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.

• Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.

• Do not lift the pump by its power cord.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or

operate the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 15 minutes

• No tools required for assembly.

ASSEMBLY INSTRUCTIONS

1. Place your pump inside the filter box bottom, close to the

center. Make sure that the outlet points up. Route the cord

through the hole in the top corner of the filter box bottom. Fig. 1

Fig. 1

2. Place the bio media balls around the pump. Fig. 2

Fig. 2

Pump

Filter box

bottom

Pump

Bio media

balls

PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.