Use and Care Guide

6. Place the lid (A) over the filter box bottom (B) and connect the

fountain head to the top extension tube. Fig. 6

NOTE: Fountain head kit is NOT INCLUDED.

Fig. 6

7. Place the filter assembly in the water. Fig. 7

Fig. 7

8. Place the lid on top of the filter box bottom. It should snap

closed. Fig. 8

Fig. 8

9. Connect the extension tubes to the diverter valve. Make sure

the arrow on the valve is positioned as shown and the diverter

valve is connected as shown. Fig. 9

NOTE 1: Tubes and diverter valve are NOT INCLUDED.

NOTE 2: Use diverter valve to simultaneously run a

spitter and fountain head from one pump.

Fig. 9

Fountain head

Extension tube

Diverter

valve

Water flow

PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.