Use and Care Guide

2. Place the bio-balls (E) around the pump. Fig. 2

Fig. 2

3. Connect the extension tube to the outlet of the pump using

the adapter (extension tube and adapter are part of fountain

head kit). Fig. 3

NOTE: Fountain head kit and pump are NOT INCLUDED.

Fig. 3

4. Place the fine filter pad (D) over the bio-balls and pump.

Then place the coarse filter pad (C) over the fine filter pad.

Fig. 4

NOTE: The fine filter pad is blue and the coarse filter pad is

black.

Fig. 4

NOTE: From here, a coupler or a diverter valve can be used.

a. To flow water to the fountain head only, use the coupler. (Proceed to step 5)

b. To flow water to the fountain head and a spitter, use the diverter. (Skip to step 8)

5. Connect the two extension tubes with the coupler. Fig. 5

NOTE: Extension tubes and coupler are NOT INCLUDED.

Fig. 5

Extension

tube

Extension

tube

Coupler

Extension tube

Adapter

Pump

PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.