Use and Care Guide

PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE’S: 1-888-755-4497
EN
3
PREPARATION
Before beginning assembly or operation of product, make sure
all parts are present. Compare parts with package contents list
and diagram. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact Customer
Care for replacement parts.
Estimated assembly time: 15 minutes
No tools required for assembly.
OPERATION INSTRUCTIONS
Step 3. Place the ne
lter pad (blue) over the
bio-balls and pump and
add the course lter
pad (black) on top.
Step 4. Place the lid
over the box. It should
snap closed.
Step 5. Place
assembled lter into the
water and connect the
pump into a properly
grounded electrical
outlet.
Coarse
lter pad
Fine
lter pad
Filter
box bottom
3
Step 1. Place your
pump inside the lter
box close to the center
with the pump outlet
facing up. Route the
pump power cord
through the grove on
the back corner of the
lter box.
NOTE: Pump not
included
Step 2. Place bio-balls
around the pump.
1 2
4
5