Use and Care Guide

VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.

OPERATION INSTRUCTIONS

Step 2. For Model

#FP300ASL /

#FP300ASLCA only,

connect the light to the

pump by pushing the

plug into the socket

until it is rmly seated.

Hand tighten the nut

from the plug to the

socket.

Step 3. Connect tubing

to the outlet of the pump

with the adapter.

NOTE: Tubing not

included

Step 4. Place the pump into the water and connect to properly

grounded electrical outlet.

Step 1. Adjust the ow

control to the lowest

setting. Once the pump

has been turned on

(after step 4) you may

adjust the ow control

to the preferred setting.

NOTE: If you have

Model #FP170AS or

#FP170ASCA, skip to

step 3.

3 4

GFCI

outlet