Operating Guide

3. Choose a fountain head for the desired water effect, and

assemble your choice as shown in Fig. 3.

Fig. 3

4. Choose a container for your fountain kit. Fig. 4

Fig. 4

5. If the container is not already watertight, use a plastic liner. Or

if a clay pot is used, spray the inside of the pot with a clear

acrylic sealant. Be sure to use a sealant that is safe for clay

pots. Wait 24 hours for the sealant to dry before filling the

container with water. Fig. 5

Fig. 5

6. Test fit the assembled container fountain kit in the container.

For installing the fountain with the pump cord over the side of

the container, (recommended) proceed to step 9. For having

the pump cord come out through the container wall, proceed to

the next step. Fig. 6

Fig. 6

Line

Cord

E E E