Operating Guide

CAUTION

• This pump has been evaluated for use with water only.

• Use a proper power source as indicated on the pump label.

• Keep the cord away from high temperatures or other heat sources.

• Avoid using the pump when water temperatures fall below 41° F.

• Do not use the pump in water exceeding 86° F.

• Do not pump heated liquids.

• Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.

• Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.

• Do not lift the pump by its power cord.

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,

install or operate the product. Contact customer service for replacement parts.

• Estimated Assembly Time: 30 minutes

• Tools required for assembly: container, plastic liner or sealant, drill, drill bit, plumbers putty, silicone

caulk.

OPERATION INSTRUCTIONS

1. Assemble the base plate, pump, filter block and filter cover.

Fig. 1

2. Connect extension tubes to the pump using the supplied

adapter. Fig. 2

Fig. 2

Base

late

Pum

Filter block

Filter cover

Extension tube

ter