Specifications

Channel declaration：
Normal mode：915MHz
Intelligent mode：914MHz、916MHz（Automatic selection of one
of two channels）
Operational instructions（The part that transmits the signal）：
Norma mode：
1.Press‘UP’button once and it will send a‘UP’ signal.
2.Press‘DOWN’button once and it will send a‘DOWN’ signal.
3.Press‘STOP’button once and it will send a‘STOP’ signal.
4. First, press the ‘Pairing button’ once, you can see the
‘Signal light’ will shine, then immediately press the ‘STOP’
button, as long as the ‘STOP’ button has been pressed, it will
always send the ‘landing’ signal, release the ‘STOP’ button,
signal stop transmitting.
Intelligent mode（Need to link ‘RPT_Node’ of ‘Hub’）：
1.Press‘UP’button once and it will send a‘UP’ signal.
2.Press‘DOWN’button once and it will send a‘DOWN’ signal.
3.Press‘STOP’button once and it will send a‘STOP’ signal.
4. Press ‘Pairing button’ once, see the signal light on, press
‘STOP’once, signal lignt flash blue quickly, at this time has
sent a signal.