Users Manual

Operational instructions（The part that transmits the signal）：
Only in intelligent mode can it transmit signals.
Intelligent mode（Need to link ‘RPT_Node’ of ‘Hub’）：
1.Press‘Setting button'once and a signal will be sent.
2.When the motor and remote controller have been added to the
main engine, and the remote controller has been matched with
the motor, press the ‘UP’ key, the‘STOP’ key or the ‘DOWN’
key of the remote controller once, the motor will receive the
signal, and will respond to a signal. Or when using APP to
operate and control the motor, the motor will also respond to
the signal. In addition, when the motor is in RPT_Node
intelligent mode, as long as the motor set the stroke, the motor
will continue to send signals when it is moving.