User Instructions

SMARTENTRY Local Encoder Using Instruction
18
2.9 Create whitelist card
1) Enter the whitelist card interface, put the card on the local encoder, add the users / operators / staffs to the blacklist
and click "Create Card". The validity of the whitelist card can be customized. Users of the card shall be selected before
creating, and the whitelist card can only be used by software operators and staffs. The factory blank card must be
registered as the card of the project before it can be created as the whitelist card. For the same user, its user number, card
number and pincode are blacklists, not a blacklist. The same order may contain multiple locks, multiple cards and
multiple users. If the blacklist is added, the number of blacklists is cumulative, not the same. When creating a whitelist
card, the number of blacklists will be displayed on the interface. Due to the limitation of the number of blacklists in the
card, a maximum of 84 blacklists can be dereported at one time. If the number of blacklists exceeds 84, multiple whitelist
cards need to be created, or the blacklist can be synchronized into the lock with APP at one time (there is no limit on the
number of blacklists synchronized with APP).
2) Close the whitelist card to the lock, delete the specified users / operators / staffs from the blacklist, then the users /
operators / staffs can open the lock.
3) Users who have released the report of loss can manually remove them from the blacklist. Clear blacklist means to
restore the status of order or operators / staffs from disable to normal, same function as manually enable orders or
operators / staffs.