User Instructions

SMARTENTRY Local Encoder Using Instruction
15
number, card number and pincode are blacklists, not a blacklist. The same order may contain multiple locks, multiple
cards and multiple users. If the blacklist is added, the number of blacklists is cumulative, not the same. When creating a
blacklist card, the number of blacklists will be displayed on the interface. Due to the limitation of the number of
blacklists in the card, a maximum of 56 blacklists can be reported at one time. If the number of blacklists exceeds 56,
multiple blacklist cards need to be created, or the blacklist can be synchronized into the lock with APP at one time (there
is no limit on the number of blacklists synchronized with APP).
3) Close the blacklist card to the lock, the blacklist is written into the lock, then the users in the blacklist cannot open
the lock with card and pincode. Use the card held by the users in the blacklist to open the lock that has been written into
the blacklist, the flag in the card becomes disable, the card cannot open any lock unless the user is removed from the
blacklist and the user card is created again.