User Manual

ManualsBrandsSmartmi ManualsAir purifiersAir Purifiers for Home Portable - HEPA H13 - Smart Air Purifiers for Bedroom, Small Room, Office - Smoke Remover Dual Sensor and App Control (Dark Grey)

6

7

8

9

Table Of Contents

10

Maintenance and Care

Power off purifier and disconnect it from the power supply before performing the following operations.

Cleaning the Filter

Housing

Turn over the purifier and

remove the filter by rotating it

counterclockwise.

1

Use a vacuum cleaner

to remove dust from the

ventilation hole and cabin

walls, or wipe them using a

soft cloth.

2

Re-install the filter after it has

been cleaned.

3

Note: Do not spray liquid onto the

purifier's casing, or wipe it using a wet

cloth. This could lead to drops of water

leaking into the base of the device.

Cleaning Laser

Particulate Matter

Sensor

Turn over the purifier and

remove the filter by rotating it

counterclockwise.

1

Use a screwdriver to loosen

the screws on the sensor

cover.

2

Remove the cover and

clean it with a hair dryer or

pneumatic air gun.

3

Once cleaning is finished,

fix the cover back onto

the sensor and tighten the

screws.

4

Note: Do NOT clean with hot air.