Making Appliances that Move People Smartmi Air Purifier P1 User Manual
Making Appliances that Move People
Table of Contents Smartmi Air Purifier P1 User Manual WARNING Precautions Package Contents Product Overview Installation Use QR Code for Installing "Smartmi" App Maintenance and Care Specifications 01 02 03 04 06 07 08 10 11
WARNING When the power adapter is damaged, it must be replaced with a genuine power adapter purchased from the manufacturer or after-sales service department. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Precautions Turn off and unplug the purifier before moving it. The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly. Maintain a distance of at least 20 cm between the air inlets and walls or other objects. Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains. Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of bacteria growth.
Package Contents Read this manual carefully before use, and retain it for future reference. Note: In this manual, the illustrations of the product and its accessories and the user interface are schematic diagrams for reference only. The actual product may vary from that shown in the schematic diagrams due to product updates and upgrades. Please refer to the actual product.
Product Overview Touch Display Screen Fan Grille Handle Laser Particulate Matter Sensor Power Port Front View Rear View 4
Screen Display Light Sensor Screen brightness will adjust automatically based on the surrounding environment, thus avoiding night-time light pollution. Pollen Alert Indicator Green Yellow Orange Red Very good Good Moderate Unhealthy Custom Indicator After "Custom" mode is selected, " " will illuminate on the screen. Wi-Fi Status Indicator Auto Indicator PM2.5 Indicator After "Auto" mode is selected, " " will illuminate on the screen.
Installation 1 Place the purifier on a flat and stable surface with the touch screen facing upwards. 20cm or mor e or 20cm e mor Placing the Purifier at an Appropriate Place Note: For optimal air purification, keep doors and windows closed during use. To allow the purifier to operate as effectively as possible, maintain a suitable distance between its air inlet and obstructions such as walls (see figure above). 6 2 Connect power adapter to the power port at the bottom of the main unit.
Use 1 2 After connecting to a power supply, press " " button to power on. Upon initial startup, the purifier will operate in "Auto" mode. For subsequent startups, it will operate in such mode that it is shut down previously. Press " 3 Press " " button to set shutdown time in advance. CL 1h 2h 3h 4h " button to set a mode for the purifier. Note: After the timer is activated, the indicator will illuminate. Available time intervals are displayed as follows, "0h, 1h, 2h, 4h, and 8h".
QR Code for Installing "Smartmi" App This product is connected to the Smartmi app and can be both controlled and interconnected with other products through the Smartmi app. Scan the QR code to download and install the Smartmi app. Users who have already installed the app may navigate to the product connection interface. Alternatively, you can search for "Smartmi" in the app store and download the app in this way. Open the Smartmi app, click "+" on the home page, and add a device when prompted.
Filter Status Reminder 1. Checking Filter Lifespan Click on the product page on the app and check the filter level, which will be displayed as a percentage. Replacing and Resetting the Filter 1 Turn over the purifier and remove the filter by rotating it counterclockwise. 2 Replace the filter by following the instructions contained in the user manual. 98% of filter life remaining 2. Filter Replacement Reminder Filters should be replaced every 6–12 months.
Maintenance and Care Power off purifier and disconnect it from the power supply before performing the following operations. Cleaning the Filter Housing 1 Turn over the purifier and remove the filter by rotating it counterclockwise. 2 Use a vacuum cleaner to remove dust from the ventilation hole and cabin walls, or wipe them using a soft cloth. 3 Re-install the filter after it has been cleaned. Note: Do not spray liquid onto the purifier's casing, or wipe it using a wet cloth.
Specifications Name Smartmi Air Purifier P1 Rated Voltage 120 V~ Model ZMKQJHQP11 / ZMKQJHQP12 Rated Frequency 60 Hz Item Dimensions φ220 × 362.5 mm Rated Power 30 W Net Weight Approx. 3 kg Noise Level 50 dB Suitable Temperature 5°C-40°C Suitable Humidity <85% RH Recommended Surface 15–26 m2 * Wireless Connectivity Wi-Fi IEEE 802.11 b/g/n 2.
FCC ID:XXXXXXXX Contains FCC ID : 2ANDL-TYWE3SE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
