User's Manual
Table Of Contents
- Thank you for Choosing us
- Distribution Kit
- Safety and Storage
- Indicators and Slots
- Connecting
- Installation
- Connecting to Internet via Wi-Fi
- Remote Control
- Remote Control Setup
- Automatic Setup
- Setting up Remote Control by Using Manufacturer Number
- Table of Manufacturer Numbers and Codes
- Setting up Remote Control by Using a Manufacturer Code
- Controlling Volume of STB or TV
- Changing STB Code
- Resetting the Remote Control
- First Start
- Troubleshooting
- Cleaning
- Disposal
- WEEE Compliance Statement
- Specifications
- Licensing and Certification
- EC Declaration of Conformity
- FCC Compliance Statement
- Innovation, Science and Economic Development (ISED) Canada Compliance Notice
- Manufacture date
- About the Manufacturers
- Warranty
– 7 –
Switch channels
Numeric keys
* You can control TV after the RC setup
** RC appearance may differ from that shown in the picture.
Replacing the Battery
This remote is operated by a replaceable CR2032 battery. In accordance with IEC
60065:2014, the battery cover is held in the remote control case with considerable force
to prevent children from accessing the battery without adult supervision. Use a
screwdriver to open the cover. Be careful not to damage the battery cover or remote
control case.
To replace the battery:
1. Use a tool to remove the battery cover:
2. Remove the old battery:
3. Insert a CR2032 battery, positive (+) side up.
4. Insert the cover and close the battery door.
Battery Information
ISO 7000-0434 (2004-01)
WARNING: Refer to the battery disposal and safety information before
replacing the battery.
Do not ingest the battery, chemical Burn Hazard.
With a screwdriver
on the slot, do the
opening movement.
Battery
polarity