Set-top Box SML-5045W6 User Manual ©2022 Smartlabs Proprietary and confidential
Thank You for Choosing Us The SML-5045W6 is a small-form and high-performance set-top box (STB) with 4K/UHD video support and is able to deliver to your home the exciting world of cutting edge interactive services. This manual contains a description of all possible features and options of SML-5045W6, however your device may look slightly different from the one pictured in this document.
● If a storm is coming or if you are not going to use the STB for a long time, unplug the power cord and disconnect the Ethernet cable. This will help to protect the unit from lightning and power line surges. ● Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. ● Power adapter shall be installed near the equipment and shall be easily accessible.
If fluid from the battery comes into contact with skin or clothing, immediately flush the affected area with clear water. CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instruction in this manual. Indicators and Slots Front Panel Element Purpose Power indicator Green — STB is switched on and operates normally. Red — STB is in the stand-by mode.
Element Purpose DC 12V Port for a power adapter A/V Analog audio/video interface (composite + stereo audio signal) HDMI Audio/video interface for connecting with an HDMI-compliant device S/PDIF Optical audio output to audio receiver or speakers (optional) LAN Ethernet port, 10/100 Mbps USB USB 2.0 port Note: the device appearance may differ from that shown in the picture. Installation 1. Remove your STB from packaging. 2.
. If the problem persists, check the settings of your wireless access point (router) or use a wired Ethernet connection. First Start When you switch on the STB for the first time, make sure that the STB is connected to a managed IPTV network. The box will start downloading the latest version of the software. Updating may take a few minutes. Do not disconnect the STB from the power supply and from the Internet before the updating is complete. After finishing the STB will reboot automatically.
Disposal The STB must be disposed separately from household waste. When the STB reaches its end of life, contact local authorities to learn about disposal and recycling options. The correct disposal will help prevent potential negative impact on the environment and human health. The STB remote control contains a battery. Dispose of the battery according to your local environmental laws and guidelines.
BT module: Standard BT 5.2 + BLE Operating frequency 2402–2480 MHz Max. transmitting power (EIRP) not more than 8 dBm (BT class 1) The device complies with RF specifications when the device is used at 20cm from your body. The WLAN function for this device is restricted to indoor use only when operating in the 5170 to 5250 MHz frequency range (excluding the USA). This device may be operated in all member states of the EU. Max.
Hardware revision: JUW7.820.00293831 V2 Software version: V20220305.010058 Note: Due to regular updates to improve the performance and consumer qualities of the device, its current software version may differ from the specified one. * The availability of some ports may vary depending on service provider requirements. ** Support for any of the listed codecs is individual and meets the requirements of the service provider.
Smartlabs Holding Ltd is able to change, improve any product described in this guide and also the guide itself without preliminary notice. © Smartlabs Holding Ltd, 2022. No part of this document can be reprinted, republished without a preliminary agreement with Smartlabs Holding Ltd. EC Declaration of Conformity This product can be used across EU member states. The plug is considered as a disconnect device of the following power adapters: ● Adapter 1. Manufacturer: Dongguan Sunun Power Technology CO.
Note that this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Warranty The appliance warranty is provided through the service provider. The warranty period and conditions are determined by the service provider. If maintenance or repair is required please contact your service provider. No part of this document shall be considered as warranty.
ISED Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
