User's Manual

When using the STB with a plasma TV, do not put picture on pause for more than
5 minutes, due to plasma TV screen design it could lead to display damage.
The STB manufacturer is not responsible for any damage caused in such
manner.
The software on your STB is updated automatically. Do not unplug the power cord
and do not disconnect the Ethernet cable while the software is updating. The
STB manufacturer is not liable for any consequences of incorrect software
update.
The manufacturer does not guarantee the absence of interference with other
devices. To eliminate possible interference, increase the distance between the
STB and other equipment, or connect equipment using a different setup.
The device is going to be operated in 5150 to 5250 MHz frequency range. It is
restricted to indoor use only. This device may be operated in Canada.