SML- 5041W User manual
Thank you for choosing us The SML-5041W is a small-form and high-performance set-top box (STB) with 4K/UHD video support and is able to deliver to your home the exciting world of cutting edge interactive services. This manual contains a description of all possible features and options of SML-5041W, however your device may look slightly different from the one pictured in this document.
When using the STB with a plasma TV, do not put picture on pause for more than 5 minutes, due to plasma TV screen design it could lead to display damage. The STB manufacturer is not responsible for any damage caused in such manner. The software on your STB is updated automatically. Do not unplug the power cord and do not disconnect the Ethernet cable while the software is updating. The STB manufacturer is not liable for any consequences of incorrect software update.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Indicators and slots Front panel Element Purpose Power indicator Green — STB is switched on and operates normally. IR receiver The internal IR receiver is accepting signals from the IR remote control. Red — STB is in the stand-by mode.
HDMI The audio/video interface for connecting with an HDMI-compliant device LAN Ethernet port, 10/100 Mbps USB USB 2.0 port Connecting Power adapter TV Router USB Installation 1.Remove your STB from packaging. 2.Make sure that the place, where you are installing the STB, meets the following requirements: Place STB on a flat surface. Do not place the STB on slick surfaces, where there is a risk of vibration, fall or other damages of STB.
4.Connect the Ethernet cable to the STB. If you a going to use the Wi-Fi connection skip this step. 5.Connect the STB and the TV set to the power network. Connecting to the Internet via Wi-Fi 1. 2. 3. 4. Turn on the STB and wait for it to boot. Go to the "Settings" menu on the home screen. Next, "Advanced" → "WiFi". Select your wireless network in the list of available networks. Type the password for the selected network using the on-screen keyboard (if required). 5.
Troubleshooting Problem Possible reason No picture 1.TV is not turned on 1.Turn on your TV The screen displays "No signal" 1.STB is not connected to the mains supply. 1.Connect STB to the mains supply. No sound Remote control is not working STB turns off periodically 2.STB is turned off. Solution 2.Turn STB on by using its remote control. 3.TV is set to the wrong input source. 3.Use TV remote control to select the video input connected to STB. 1.The sound is turned off on TV. 1.
Specifications Model No.: SML-5041W Dimensions: 110 x 107 x 33 mm, 130g Power supply: Input: AC 100-240V, 50/60Hz Output: DC 12V, 1.2A Ports and interfaces:* The digital audio/video interface HDMI 2.0 with HDCP 2.2 and HDR support The CVBS video interface + analog stereo audio interface (TRRS mini-jack) Optical digital audio interface S/PDIF Ethernet port, 10/100 Mbps USB 2.
Wi-Fi module: Standard Operating frequency IEEE 802.11n\ac, MIMO 2x2 2.4GHz band: 2412~2472 MHz 5GHz band: 5150~5250 MHz & 57255850 MHz (depends on country) BT module: Standard Operating frequency BT v4.1 + BLE 2402–2480 MHz Max. resolution supported on HDMI: 4Kx2K@60 Supported CVBS standards: PAL, NTSC Supported video and audio codecs: to get information about actually supported codecs, please contact the service provider.
About the manufacturers Manufacturer: Smartlabs Holding Ltd Manufacturer address: Nafpliou 15, Limassol, Cyprus, 3025.
