Booklet

MISSION OBJECTIVE
Get to know your new RECON 6.0 with this seemingly simple field maneuver.
You’ll program it to run a triangular course, landing safely back at field command
HQ. After completing this mission, you’ll know how to:
Enter and save a trip
Program turns in degrees (45
0
or 90
0
)
Program distance in inches and feet
Program basic maneuvering commands (forward, left, right, reverse)
MISSION TRAINING BRIEF
Before you start, clear the field terrain by using your tape measure to mark off an
empty 4' x 4' safe zone. Your Rover’s starting position will be at the safe zone’s bottom left corner.
MISSION BACKGROUND
This course has been sketched out for you, and the programming code is supplied,
shown on the mission map on page 9. Once you’re an ace programmer, you can
plug in your own numbers for similar missions. Use the square root button
on a calculator to calculate the length of the third side of the triangle.
MISSION 01 Basic Field Maneuvering MISSION 01 Basic Field Maneuvering
BASIC TRAININGBASIC TRAINING
8