Booklet

This is the START SCREEN.

It is the first step of any program.

LOAD accesses a previously recorded trip so you can

view, edit, or run it. It also accesses all 9 sound files, so you

can listen to them.

PROGRAM is where you can start a new trip or

writeover a previously programmed trip from scratch. You

can also access sound files #1–#4 to record your own

custom sounds.

TRIP# A trip is a program that tells your Rover what

you want it to do. You can store up to nine different trips

at a time. # (number) indicates which trip will be loaded

or programmed.

SOUND# There are four 5-second blank sound files

and five prerecorded ones. # (number) indicates which

sound file will be programmed (#1–#4), or loaded:

#5 funny horn

#6 beep! beep!

#7 laser blast

#8 siren

#9 dance beat (This sound needs to be turned on and off,

so your Rover has a soundtrack to dance to.)

RUN activates a programmed trip. It will also play a

sound file.

EDIT allows you to access (and thus edit) an existing trip

or sound file.

PROGRAM LINE Each program line allows you to

program one of 10 commands. It can store up to 50 program

lines per trip. Only 3 program lines are displayed at

one time.

PROGRAM LINE NUMBERS tell you which

line of the program you are on. Each line is automatically

entered into the program as you create a new program line.

Each trip will always begin at Program Line 01.

LCD BASICS