Booklet

B
C
A
To listen to what you recorded:
Choose the flashing RUN icon on the screen
by pressing ENTER.
CREDIBLE INTELLIGENCE
If you want to use one of your Rover’s preprogrammed
sounds for this mission, simply LOAD to listen to any of the
sound files from #5–#9. Note the number of your favorite
sound effect.
If you’d like to rerecord:
Scroll to EDIT [ENTER]. Then scroll to RECORD
SOUND
and press the RECORD button again.
BASIC TRAININGBASIC TRAINING
GO!
LET’S
GO!GO!
LET’SLET’S
STEP 1:
PREP STEPS—PATROL ZONE
STEP 1:
PREP STEPS—PATROL ZONE
MISSION 04 Security Patrol
MISSION 04 Security Patrol
You’ll want to record your warning under SOUND
#2. Remember, RECORD SOUND
will appear.
Press and hold the RECORD button and state your
RECON 6.0’s warning. Release the button when
you are done recording.
Remember, it will beep once when you begin and
twice when you release the button or when your
recording limit of 5 seconds is up!
Your Rover will stop and sound its warning at
the center point (at the middle of the door) before
continuing to the other side. When you write the
programming code, you’ll need to know at how
many feet (or inches) your Rover performs this
act of security.
Write these numbers in the blanks to the right
and on your mission map.
Measure the width of your door using your tape
measure (most are between 2 ½ and 3-feet).
DOOR WIDTH: ______
Add 12 inches (1 foot) to this number.
(That will allow for 6 inches per side.)
PATROL DISTANCE: ________
Divide the patrol distance number in half.
CENTER POINT NUMBER: _________
STEP 2: RECORD YOUR SOUND FILE
STEP 2: RECORD YOUR SOUND FILE
26