Booklet

B
A
Place RECON 6.0 in the starting position (bottom left).
Choose RUN (ENTER). You have 3 seconds before your RECON 6.0 will be on the move!
CREDIBLE INTELLIGENCE
If you don’t press the SAVE button after you finish
programming, you’ll lose your code, and your Rover won’t
be able to run its course. So always SAVE your work!
Program Line 07 will be flashing, but you won’t
need it. You’ve entered all the code you’ll need
for this mission.
While the Program Line Number is flashing,
press SAVE.
The screen will now look like this.
STEP 3:
SAVE AND RUN!
STEP 3:
SAVE AND RUN!
CREDIBLE INTELLIGENCE
If you need to make a change, scroll to EDIT and press ENTER. This allows you to
change the code. If you need to INSERT or DELETE a line, refer to page 47. Don’t forget
to save any changes!
13
DEBRIEFING
Did your Rover follow the Mission 01
map? If so, then mission
accomplished! You’ve passed
Basic Field Maneuvering! If not:
Double-check your code. Is all
of your programming correct?
Is your starting position accurate?
Check your measurements. Did
you input them correctly?
Are your batteries low?
None of the above?
Try recalibrating your RECON 6.0
to the current surface. Directions
are on pages 6–7.