Booklet

A
D
B
E
C
Your screen will now look like this.
The numbers 01, 02, and 03 represent your
first three lines of code. All the command icons
appear on line 01.
Choose the flashing 01 by pressing ENTER.
The first command, DRIVE FORWARD
, is
flashing. Press ENTER.
Remember, to choose other commands just use
the ARROW buttons on the directional pad.
The INCHES and FEET icons will now be lit.
As shown on the Mission 01 map on page 9,
your RECON 6.0 will first drive forward 2 feet, so
choose FEET by pressing ENTER.
01 (for 1 foot) will now be flashing.
Press the UP ARROW button until 02
(for 2 feet) is flashing, and hit ENTER.
Program Line 02 will now be flashing.
Press ENTER.
Use the RIGHT ARROW button to scroll over
to the RIGHT TURN
icon.
Press ENTER.
STEP 2:
WRITE YOUR PROGRAM LINES
STEP 2:
WRITE YOUR PROGRAM LINES
11
CREDIBLE INTELLIGENCE
The RECON 6.0’s screen displays 3 program lines at a time. As you enter more
commands, the display will automatically scroll down to 04, 05, etc., until you
reach the memory limit of 50 program lines.
CREDIBLE INTELLIGENCE
The UP and DOWN ARROWS allow you to toggle between two options (like INCHES
and FEET, 45 and 90 DEGREES, ON and OFF) as well as scroll through the numbers
1–99.