User's Manual

User Manual Version 1.0.0
SMARTICO LLC. Page 4 of 15
1 Overview
This document describes the hardware of the Smartico Industrial Sensor LoRaWAN. The sensor has a wide range of
peripherals that can be used by the user in their own applications. The functionality of the device depends on the
application that is integrated and launched in the device. This document does not describe the functionality of the device,
but only contains a description of the technical parameters and capabilities.
For the functional part, see the document "App Description" for the required application.
The device can operate in the LoRaWAN 1.0.2 standard Class C or Class A.
2 Specifications
Table 1: Smartico Industrial Sensor LoRaWAN Specifications
Parameter
Description
Compliance with LoRaWAN
1.0.2 Class A,С
Frequency plan of LoRaWAN
EU868/US915
Power of transmitter, mW
25/100
Digital inputs
4
Analog inputs 4-20mA
2
Analog inputs 0-10V
2
Line control inputs
2
Serial interface
RS485/232, 1-WIRE
Outputs
2
Maximum output load current, mA
500
Connection of external antenna
Available
Magnetic sensor
Built-in
Accelerometer
Built-in
Archive of events and messages
100 000
External power supply, V
5-55
Built-in battery
Li-SOCl2 C
Battery capacity, mAh
9000
Ambient temperature, °C
-30 …+75°C
Weight, g
250
Dimensions, WxDxH mm
100x100x40
Ingress protection
IP67
3 Hardware description
The device consists of two printed circuit boards located in one housing. The main board contains the LoRaWAN
communication interface, the central processor (MCU) and the user interface. The second board is an extension board
and contains a set of peripheral interfaces, a power supply and other elements. A detailed description of each board is
described in the following sections.