SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 Total Protection Alarm System SMARTHOME™ #7307 PAT.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 TABLE OF CONTENTS Your Guide to the Total Protection Alarm System SMARTHOME™ #7307 PACKAGE CONTENTS........................................................................4 OVERVIEW........................................................................................5 PLANNING YOUR HOME SECURITY NEEDS....................................... 6 INSTALLATION -Control Panel......................................................
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 PLANNING YOUR HOME SECURITY NEEDS Before you begin to install your security system, analyze the premises to determine your security needs. Consider those doors and windows which are more likely to be used as points of entry by an intruder, the ones that are poorly lit or the entrances that can not be seen from the street.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 INSTALLATION INSTALLATION 2. Position the magnetic switch connected to the transmitter on the door/window frame. 4. Attach the unit to the wall. If hanging the unit, insert two screws using the template provided. If screwing the back directly to the wall, take the back plate right off by prying apart one hinge. Use as much force as needed. The plastic hinge will not break. 3.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 INSTALLATION TESTING YOUR SYSTEM (Cont. : Installing the motion sensor (PS-433) Set the switch on the side to "TEST" and allow 60 seconds for the unit to warm up. ( when using test mode, a signal will not be sent to the Control Panel ). Now walk in the area you want the motion sensor to detect movement in. If movement is detected, the red light on the front of the unit will appear.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 LIGHTS AND SOUNDS STANDARD PROGRAMMING Below is an explanation of the lights and sounds of the Control Panel. LIGHTS ACPWR light on System is being powered by electrical current. ACPWR light off System is not receiving any electrical power. LOBATT. light off Backup battery is connected and working. LOBATT. light flashing Backup battery is weak, needs to be replaced. ARM light off System is disarmed.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 STANDARD PROGRAMMING Option 2: Home Sequence - To arm your system when someone remains in the premises. 1. Press the current MPIN [ 0 0 0 ]. 2. Press [ C ]. You hear a long beep. The arm light and the red lights in zones 3 and 4 go on. Both the green and red lights flash in zone 1 for 45 seconds which gives you 45 seconds to leave the premises before the system is activated.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 KEYCHAIN TRANSMITTER (4B-434) TO DISARM THE SYSTEM, OR DEACTIVATE THE SIREN USING THE KEYCHAIN TRANSMITTER When the system is armed: Press button #3. The red light on the transmitter flashes and the Control Panel beeps twice. The system is now disarmed.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 PASSWORDS ADVANCED PROGRAMMING SECONDARY PERSONAL IDENTIFICATION NUMBER (SPIN) PROGRAM SENSORS TO DIFFERENT ZONES You may want to give someone limited access to the system, (baby sitter, cleaner, repairman etc.). For this purpose the SC-100 provides you with the option of adding up to 3 separate SPIN. You now have a basic understanding of how the SC-100 security system works.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 ADVANCED PROGRAMMING To program sensors to send their signals to a different zone, you must first clear them from communicating with their current zone. TO CLEAR A ZONE 1. Enter the current MPIN. 2. Press [ B ]. 3. Press the number key to identify current zone [ 1, 2, 3 or 4 ]. The zone light(s) will flash for eight seconds. 4. While the zone light(s) are flashing, press [ * ].
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 ADVANCED PROGRAMMING ADVANCED PROGRAMMING STANDARD ARMING SEQUENCES 1. Enter the current MPIN. Each zone can be programmed to react 5 different ways when it receives a signal from a remote sensor. 2. Press [ A ]. 1. Chime Mode - represented by the green lights When only the green light is on and the Control Panel receives a signal from a remote sensor, the Control Panel emits a subtly two tone chime.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 ADVANCED PROGRAMMING SUMMARY OF ARMING SEQUENCES TO CUSTOMIZE A SEQUENCE: Below is a table summarizing all the preprogrammed sequences. Program the system to the sequence you want to alter. Sequence Zone 1 1. Enter the current MPIN. MPIN A # chime 2. Press [ B ]. 3. Press a number key to select the zone you would like to change, [ 1, 2, 3 or 4 ]. The zone lights in the chosen zone will flash for eight seconds. 4.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 BATTERY MAINTENANCE The SC-100 Security System comes with 5 batteries that at some point you may have to replace: 1 9 volt alkaline battery for the Control Panel 1 9 volt alkaline battery for the Motion Sensor 2 12 volt alkaline batteries for the 2 Door/Window Sensors 1 12 volt alkaline battery for the Keychain Transmitter Recommendation: Test you system periodically to ensure that all batteries are working.
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307 BATTERY MAINTENANCE KEYCHAIN TRANSMITTER BATTERY The Keychain Transmitter operates on a 12 volt alkaline battery which is installed at the factory. There are two screws on the back of the transmitter that holds the case together. To replace the Keychain Transmitter battery: 1. Undo the two screws on the back of the transmitter. The back will then come off. 2.
