RemoteLinc INSTEON® Wireless Remote Control Model : 2440
RemoteLinc Owner’s Manual TABLE OF CONTENTS ABOUT REMOTELINC................................................................................................................................. 3 Key RemoteLinc Features ......................................................................................................................... 3 What is Included with RemoteLinc ............................................................................................................ 3 WHAT IS INSTEON? ...........
RemoteLinc Owner’s Manual ABOUT REMOTELINC Congratulations on purchasing the INSTEON RemoteLinc. With its sleek, handheld design, RemoteLinc allows you to use the power of INSTEON to control your home with the convenience of a wireless radio frequency (RF) controller.
RemoteLinc Owner’s Manual WHAT IS INSTEON? Since its inception in 2005, INSTEON has become a best-selling home-control networking technology, offering more reliability and flexibility than any other home management system on the market. INSTEON systems are simple, reliable, and affordable. Simple, because each device takes mere minutes to install. Reliable, because every INSTEON device works as a network repeater, ensuring your commands will not be lost.
RemoteLinc Owner’s Manual USING REMOTELINC Using the RemoteLinc Buttons On/Off Button Pairs The On/Off button pairs will each control any Responders Linked specifically to the pair. Responders will behave differently depending on whether you tap, double-tap, or hold down the buttons.
RemoteLinc Owner’s Manual CONTROLLING INSTEON RESPONDERS FROM SWITCHLINC DIMMER Linking RemoteLinc to an INSTEON Responder To use RemoteLinc as an INSTEON Controller, follow these steps to Link RemoteLinc and an INSTEON Responder (the device you wish to control with RemoteLinc) together. Refer to the Responder’s Owner’s Manual for detailed instructions on how to properly install and Link it to RemoteLinc.
RemoteLinc Owner’s Manual CREATING AN INSTEON SCENE INSTEON scenes let you activate dramatic lighting moods with the press of just one button. For example, you can set all the lights in a scene to dim to 50% or turn certain lights on while turning others off, all with the tap of a button on a Controller. INSTEON scenes are very easy to set up – just Link more than one Responder to the same On/Off or Scene button on a Controller.
RemoteLinc Owner’s Manual Multi-Unlinking Multi-Unlinking Mode can be used to quickly remove devices from an INSTEON scene. You may remove as many of the Linked Responders from the scene as you would like. The following will work for the most common INSTEON devices: 1) Set the Controller to Unlinking Mode. (For most Controllers, press & hold the desired On or Scene button for 10 seconds twice or the Set button for 3 seconds twice.) 2) Tap the Set button on the Controller.
RemoteLinc Owner’s Manual Stuck Button Feature If any button on RemoteLinc is depressed for longer than 60 seconds, the Controller will enter sleep mode until the button is released. This feature is provided to preserve the battery life in situations like RemoteLinc falling between sofa cushions. Restoring Power to RemoteLinc RemoteLinc stores all of its settings, such as Links to other INSTEON devices, On-Levels/Ramp Rates, etc., with non-volatile memory.
RemoteLinc Owner’s Manual ABOUT INSTEON Using Dual-Band INSTEON Devices to Upgrade Your Network What are phases? The majority of single-family homes in North America have two phases (or “legs”) of 110 Volts coming into their electricity panels. From the panel, they are distributed throughout the home, providing power to outlets and wall switches. These phases come together in some parts of the home to provide 220 Volts of power to large appliances, such as an electric oven or pool pump.
RemoteLinc Owner’s Manual TROUBLESHOOTING Problem The Status LED on RemoteLinc is not turning on at all. RemoteLinc will not go into Linking or Unlinking Mode. RemoteLinc won’t Link or work with a Responder. Possible Cause Solution Batteries may be missing or depleted. Install four fresh batteries into RemoteLinc. The Status LED might have been disabled. Re-enable the Status LED. See Enabling / Disabling the Status LED. You didn’t hold the On button down long enough.
RemoteLinc Owner’s Manual SPECIFICATIONS, CERTIFICATION, AND WARRANTY Specifications View specifications for RemoteLinc at: www.smarthome.com/2440.html FCC & Industry Canada Compliance Statement This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
RemoteLinc Owner’s Manual Limited Warranty Seller warrants to the original purchaser of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or errors caused by misuse or neglect.
