HTL SERIES (HTL02A/HTL04A) ENGINE OIL HEATER USER MANUAL SMARTGEN (ZHENGZHOU) TECHNOLOGY CO., LTD.
Chinese trademark English trademark SmartGen — make your generator smart SmartGen Technology Co., Ltd No.28 Jinsuo Road, Zhengzhou, Henan Province, China Tel: +86-371-67988888/67981888/67992951 +86-371-67981000(overseas) Fax: +86-371-67992952 Email: sales@smartgen.cn Web: www.smartgen.com.cn www.smartgen.cn All rights reserved.
CONTENTS 1 OVERVIEW..................................................................................................................... 4 2 PERFORMANCE AND CHARACTERISTICS .................................................................... 4 3 SPECIFICATION............................................................................................................. 4 4 CONNECTIONS..............................................................................................................
1 OVERVIEW During cranking, if the outside temperature is lower than 4ºC, engine lubricant may lose its lubricating properties, which can damage the engine. Engine oil heater should be installed to ensure normal starting and running of the engine when the outside temperature is lower than 4 ºC. HTL series engine oil heater adopt cast stainless steel inner pipes and end closure with high corrosion resistance. This product is suitable for various engines with (2~110)L engine oil volume.
4 CONNECTIONS ---- After open the back cover, please connect the wire according to the label on the terminal, E: earth line, N: null line, L: live line. ---- Heat resisting power line is strongly recommended. ---- Earth line must be soundly connected to earth. 5 CASE AND INSTALLATION DIMENSIONS Unit: mm Fig.1 – HTL02A Case and Installation Dimensions Fig.
