User Manual

CMM366A-4G Cloud Monitoring Communication Module User Manual Page 9 of 16
4.7 LINK
Receive genset data information by connecting module LINK port with Genset Controller LINK port.
Fig.6 – LINK Connection
4.8 USB HOST
Receive genset data information by connecting module A-type USB port (female port) with Genset
Controller USB port via USB cable.
Fig.7 – USB HOST Connection
4.9 USB DEVICE
All the parameters can be configured and view CMM366A-4G ID&Login password by connecting
USB port with USB disk of PC software.
Fig.8 – USB Connect PC Device