SmartCrop Sensors Installation Guide Version 1.0 Only Smartfield¥trained and certified installers are authorized to install and maintain equipment.
TM Copyright © 2010 Smartfield , Inc. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical, for any purpose without the express written permission of TM Smartfield , Inc. Information in this document is subject to change without prior notice. Certain names of program products and company names used in this document might be registered trademarks or trademarks owned by other entities. SMARTFIELD, INC.
Introduction Congratulations, you have just purchased the SmartCrop Sensors, one of the most advanced irrigation management tools available. Listen to your crop..... It’s talking to you Your crop is telling you when it is experiencing heat stress and needs water. The SmartCrop Sensor is smart technology that uses infrared (IR) temperature sensing technology coupled with patented USDA algorithms and methodology to determine when your crop is experiencing heat stress brought on by lack of water.
Contents 4. Setting the height of Sensor: a. Place the steel bracket on the post. Adjust the height of the sensor by moving bracket up and down on the post and secure by twisting the black knob. Note: The orientation of the SmartCrop Sensor should be placed ƕ at a 45 angle. b. The Field Sensor reads a 1:1 ration to plant; i.e.: 1 foot away = 1 foot circular read area - adjust height accordingly. c.
Smartfield One (1) Year Limited Warranty Installation 6. Learning SmartCrop Sensor a. Verify the Sensor serial numbers are appearing on the Base Station screen. b. Scroll and select each serial number and press Enter. The display fills in the box on the left side of the screen. c. Scroll and press “Finish” twice to go back to home screen. Figure 3: Base Station – top screen. Serial number: xxxxI Figure 4: Base Station – bottom screen.
to a defect in materials or workmanship; (g) to cosmetic damage, including but not limited to scratches, dents and broken plastic on ports; or (h) if any Smartfield serial number has been removed or defaced. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SMARTFIELD’S RESPONSIBILITY FOR HARDWARE DEFECTS IS LIMITED TO REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY SMARTFIELD IN ITS SOLE DISCRETION.
