Use and Care Manual

2-1
SECTION 2:
INITIAL TOOL SET UP/ASSEMBLY
2.1 Specifications
Maximum Air Pressure 90 PSI
Air Inlet 1/4” – 1/8” NPT Female
Average Air Consumption
AIR RATCHET
Maximum RPM 150 RPM
Maximum Torque 60ft/lb
Maximum Capacity 5/8”
Chuck 1/2”
Settings Forward/Reverse
AIR DRILL
Maximum RPM 2200 RPM
Chuck 1/10mm, 3/8”, 24 UNF
Reversible No
AIR DIE GRINDER
Maximum RPM 20000 RPM
Collet 1/4”
ACCESSORIES
Sanding Wheels (4)
Aluminum Oxide; 100 Grit
Sizes: 13/16”, 1”, 1-3/16”, 1-9/16”
Grinding Stones (5)
Ball – 13/16”
Wheel – 1/2”
Cone – 1-7/16”
Tree – 1”
Tree – 15/16”
Drill Bits (10)
High Speed Steel
Sizes: 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”,
5/32”, 11/64”, 3/16”, 1/4”
Sockets (4) Sizes: 9/16”, 5/8”, 11/16”, 3/4”
Wrenches
11 Gauge Sheet Steel
3/4” and 9/16” openings
Maximum speeds are stated at maximum air pressure. Excess air pressure is
hazardous and may cause the tool to exceed stated maximum speeds.