Use and Care Manual

USER’S MANUAL PAGE 27TECH-5000P
is reached, the reading may have a +/- 1.5PSI difference.
(This is normal)
• After use, loosen the hose and remove from the air pump.
WARNING: the hose will be very hot after use. Remove
carefully.
• When not in use, adaptors provided with the air pump can be
placed in the storage area on the top of the tool.
WARNING: Improperly attached hoses or accessories can become
detached under pressure and cause serious injury. Possible air
leaks can cause faulty pressure readings. Make sure all
connections are tightly secured.
NOTE: Maximum PSI for this unit is 150 PSI
NOTE: Always leave the hose free of obstructions when the tool
is not in use. Overheating could occur if the hose is blocked.
Fig.5Fig.4
A B