User Guide Guía del usuario Jump • Charge • Power Jump Starter / Power Bank Model/Modelo: JS-15000N CRANKING CURRENT: 400 Amps PEAK CURRENT: 800 Amps OUTPUT: 2x5V/2.4A, 12V/10A, 19V/3.5A BATTERY CAPACITY: 15000mAh/55.5Wh FULLY CHARGE IMMEDIATELY AFTER PURCHASE. Fully recharge after each jumpstarting, or every 3 months to ensure long battery life.
INCLUDED ACCESSORIES DANGER ACCESORIOS INCLUIDOS Please read and understand all important safety and operating instructions before using this charger. In addition, please read and follow all battery and vehicle manufacturer’s instructions and cautionary markings. Failure to follow the instructions may result in ELECTRICAL SHOCK, EXPLOSION, or FIRE, which may result in SERIOUS INJURY, DEATH, DAMAGE TO DEVICE or PROPERTY. Do not discard this information.
ventilated area. Battery acid can cause permanent blindness. Avoid touching eyes while working near battery. 3) Do not smoke, strike a match, or cause a spark in vicinity of battery or engine. Avoid explosive gas, flames and sparks. 4) Remove all personal jewelry, such as rings, bracelets, necklaces, and watches before jumpstarting operations. These items may produce a short-circuit that can cause severe burns.
Technical Specification: LED and Buzzer Communication: Battery Type Lithium-ion Polymer Battery Capacity 15000mAh Starting Current 400A Peak Current 800A Jump Start Up to 6.0L Gas Engine, 5.0L Diesel Engine USB Output 5V/2.4A, 5V/2.4A LED Flashlight 2W 12V Output 10A Max 19V Output 19V/3.
CONNECTING TO THE BATTERY 1) Identify polarity of battery posts. The positive battery terminal is typically marked by these letters or symbol (POS,P,+). The negative battery terminal is typically marked by these letters or symbol (NEG,N,-). 2) Do not make any connections to the carburetor, fuel lines, or thin metal parts. 3) Identify if you have a negative or positive grounded vehicle. This can be done by identifying which battery post (NEG or POS) is connected to the chassis.
3) Fully charge the unit. 4) When charging is complete, unplug the AC charging adapter from the wall socket first, then from the charging jack on the jump starter. DC Charging in Your Vehicle: 1) Turn the vehicle engine on. 2) Insert the DC charging adapter into the charging jack of the unit. 3) Plug the other end of DC charging adapter into vehicle’s cigarette lighter socket. 4) Fully charge the unit. Engine must keep running during entire charge.
repair or replacement of the defective part or component at a Smartech Products’ Service Center. Smartech Prodcuts will provide you with a case number for warranty service. Please keep it for future reference. Repairs or replacements without prior authorization, or at an unauthorized repair facility, will not be covered.
JS-15000N USER GUIDE PAGE 14
