Quick Guide

6
7 8
9
10
11
1. Connect to the IPCXXX
hotspot in the phone settings,
the password is 11111111;
2. Click "Other ways to
add" in the code scan
interface, and select
the “Standalone
camera”.
3.The device is successfully
added, please set a name
for the device.
3. To view and use via WiFi
or other networks, please
select "Remote View "; if
there is no network, to
view the camera at close
range, please select
"Direct Connection";
1. Select "Remote View" to
add, connect the device to
WiFi, select the working
WiFi that the device needs
to connect to, enter the
password, and click Next;
Select "Direct Connection" to add, and set the name
and password for the device to add successfully;
2. Please wait patiently
during the device
configuration network;
1. Click " Direct Connection",
set a password for the WiFi
of the device, and enter the
next step; (Direct connection
can only be connected to
the camera for viewing
locally);
2. Use the device to scan
the QR code of the mobile
phone according to the
operation shown in the
figure, and go to the next
step after hearing the prompt
tone or the device indicator
light no longer flashes;
3. According to the
interface guide, after
connecting the device
with its own WiFi, return
to the APP;
4. The device is successfully
added, please set a name
for the device.
Local direct connection add
Remote View adding process
Direct Connection adding process
When the QR code of the device cannot be found
(or the scan code is unsuccessful)：
1. Scan the QR code of
the device, and click "Add";
2. After setting the name
for the device, it can be
added successfully.
Wired add configuration
process
Power on the device,
connect it to a router with
internet access with a
network cable.
Note: the local direct connection needs to maintain
a WiFi connection with the device to properly preview
the device screen.
Note: The Direct Connection needs to be connected to
the device hotspot to preview the device screen normally.
Warning
In case of fire or lightning,pls don’t put
product in damp and raining place,operate
or maintain according to the user manual.
Be careful when you see attachment with
a Dangerous Voltage which might cause
serious electric accident.
Notice:
1. Ensure your equity,pls read the user manual
carefully before you use the product
2. Pls contact professional people if you need install
and maintain the product
3. Working Environment:temperature of -20°C~+60°C,
relative humidity under 85%
4. Pls don’t exceed the user manual’s standard range
of temperature,humidity and voltage.
Warning
Warning
In case of electric shock and fire,
pls don’t use power supply
beyond power list in user manual
Warning
CAUTION RISK OF ELECTRIC
SHOCK DO NOT OPEN
To reduce electric shock,
unprofessional people
please don’t open product
front panel or rear panel