Users Manual Part 2

Safety Guidelines
Laser radiation is dangerous. It can cause fire, burns, or damage to your eyes. Do not turn
the power on when the laser head is not facing down. Also, always wear safety glasses
when the power is on. Do not look directly at the laser radiation even while wearing the
safety glasses.
Do not leave the device while it is running. Make sure that you stay around the device so
that you are able to detect any issues or problems and to reach the device to pause the
process.
Do not place the machine on an unstable surface, such as a table that is not level.
When the bottom cover is removed and the power is on, place a board under the machine
to protect the surface underneath.
The laser is class 4 when the bottom cover is removed. Make sure none of your body
parts are exposed to laser radiation and always wear safety glasses to protect your eyes.
Do not turn the power on until assembly is completed.
Keep all of your body parts free of the processing area while the laser is running.
Do not leave the machine with the power on. Do not move the machine with the power on.
Unplug when moving the machine.
Make sure that the materials you are processing do not emit toxic substances when
heated.
Do not allow moisture around the machine body or the plug.
Do not put flammable materials near the machine.
Some materials emit smoke and odor when being processed. Ventilate the room or use a
dust collector.
Do not exceed one hour of continuous use
Do not operate in temperatures greater than 30C or 86F.
If something is out of the ordinary, stop operation immediately and unplug.
For more safety information, refer to the manuals on the website.
Maintenance
Maintenance tips are on the website with the other manuals. Please refer to it and clean
your machine regularly in order to prolong its lifespan.
The laser head is replaceable. You can purchase it on our online shop web page.
Product Warranty
Damages caused by not following the safety guidelines/ manuals/instructions will not be
covered under warranty. We also do not bear any responsibility for damages caused by
remodeling or modification of the machine.