Installation Guide

08212020
EXCLUSIVELY AT LOWE’S®
MORE SMARTCORE® QUESTIONS? Call 1-800-355-7429 and select option 2 twice (Se habla español)
INSTALLATION 101
Follow these simple steps for an easy DIY installation with quick, professional results.
Gather your supplies.
Tape Measure
Pull Bar
¼" Spacers
Flooring
Tapping Block
Coordinating Trim
Rubber Mallet
T-Square
Utility Knife
Pencil
Make sure your space is clean, flat, dry
and structurally sound.
Choose your starting wall (work from
left to right).
Use several ¼" spacers to maintain ¼"
expansion gap along the walls.
The tongue of the plank comes
o of the top of the plank.
groove
tongue
Follow these simple steps for an easy DIY installation with quick, professional results.
Tape Measure
Pull Bar
¼" Spacers
Flooring
Tapping Block
Coordinating Trim
Rubber Mallet
T-Square
Utility Knife
Pencil
Make sure your space is clean, flat, dry
and structurally sound.
Choose your starting wall (work from
left to right).
Use several ¼" spacers to maintain ¼"
expansion gap along the walls.
The tongue extends from
the top of the plank.
groove
tongue
Place tongue side of the first plank in
the starting corner and add ¼" spacers.