Installation Guide
Step 5:
IMPORTANT! Use
hammer and
tapping block to
tap long edge of
plank to ensure a
tight fit. ANY
GAPPING CAN
COMPROMISE
THE LOCKING
SYSTEM!
Step 6: Attach a
scrap piece of
floor to bridge the
gap between
ends of planks.
Step 7: Tap end
of plank with
hammer and
tapping block to
lock ends of
planks together.
Remove bridge
and continue
towards wall until
installing the final
plank in the row.
BE SURE TO
TAP ON EDGE
OF VINYL SO AS
NOT TO
DAMAGE LOCKING PROFILE.
Step 8: Use
hammer and pull
bar to lock final
piece in row.
Insert spacer at
end of row.
Continue
installation to final
row.
Step 9: Use
hammer and pull
bar to lock long
edges of planks
on final row.
Installation
4
For reference purposes only if printed or downloaded.