Use and Care Guide

! !
!
Technical Service Bulletin No. 523 7/18 | 3/3
!
SPOT & SPILL REMOVAL
Shaw Industries’ flooring products are engineered to resist and minimize
common staining.
• Absorb wet spills as quickly as possible by blotting with paper or cloth
towels. Rinse with water if necessary and blot dry.
• Dried spots should be removed by gentle agitation and rinsed with water.
Blot dry.
• Use Encore, COREtec cleaning products or products formulated for vinyl
floor cleaning. Do not use detergents or abrasive cleaners since these
products can leave a dull residue.
• Use rubbing alcohol (isopropyl alcohol) with a clean white cloth for
spots requiring a solvent type cleaner that water and cleaning agents
cannot remove.
Please note that some stain conditions may become permanent.
Safety Caution: The surfaces of resilient floors change during wet cleaning
and finish applications. Use appropriate safety measures.