Installation Instructions

Step 9: Use

hammer and pull

bar to lock long

edges of planks

on final row.



Step 1: Undercut

space under

door jamb to

allow plank to

slide freely. Tap

long edge with

hammer and

tapping block to

lock long edge.

Step 2:

Use

hammer

and pull

bar to lock

short end

of plank.

General Information

Installing underneath door jambs:

COMPLETION

1. Protect all exposed edges of the flooring by installing wall molding and/or transition strips. Make sure that no plank will be

secured in any way to the subfloor.

2. For wet areas such as bathrooms caulk the perimeter of the floor with a flexible silicone caulk.

3. Protect the finished flooring from exposure to direct sunlight to reduce fading and thermal expansion.

For reference purposes only if printed or downloaded. Revision: 05232019