Installation Guide

Step 5:
IMPORTANT!
Use hammer and
tapping block to
tap long edge of
plank to ensure a
tight fit. ANY
GAPPING CAN
COMPROMISE
THE LOCKING
SYSTEM!
Step 6: Attach a
scrap piece of
floor to bridge
the gap between
ends of planks.
Step 7: Tap end
of flooring with
hammer and
tapping block to
lock ends of
flooring
together.
Remove bridge
and continue
towards wall
until installing
the final flooring
in the row. BE
SURE TO TAP
ON EDGE OF
VINYL SO AS NOT TO DAMAGE LOCKING PROFILE.
Step 8: Use
hammer and pull
bar to lock final
piece in row.
Insert spacer at
end of row.
Continue
installation to
final row.
Step 9: Use
hammer and pull
bar to lock long
edges of flooring
on final row.

Installation
5
For reference purposes only if printed or downloaded.