Installation Guide

Step 1: Begin
installation
working from left
to right. Insert
spacers at ends
and edges where
flooring meet
wall.
Step 2: Lock
short end of
flooringby
inserting tongue
into groove at an
angle and drop
in place.
Continue to end
of first row.
Step 3: Use
leftover flooring
from first row as
starter for
second row.
There must beat
least 20cm
between flooring
end joints on
adjacent rows.
FOR TILE
INSTALLATIONS:
The distance
between end
joints should be
equal to 30cm for properappearance.
Step 4: Lock long
edge of flooring
by inserting
tongue into
groove at an
angle and drop
in place. Slide
flooring toward
end of previously
installed
flooringuntil the
tongue just
touches the
groove.
Installation

LAYOUT
4
For reference purposes only if printed or downloaded.