Installation Guide

Step 1: Undercut

space under door

jamb to allow

plank to slide

freely. Tap long

edge with hammer

and tapping block

to lock long edge.

Step 2:

Use

hammer

and pull

bar to lock

short end

of plank.

Installation

Installing underneath door jambs:

COMPLETIONCOMPLETION

1. Protect all exposed edges of the flooring by installing wall molding and/or transition strips. Make sure that no plank will be

secured in any way to the subfloor.

2. For wet areas such as bathrooms caulk the perimeter of the floor with a flexible silicone caulk.

3. Protect the finished flooring from exposure to direct sunlight to reduce fading and thermal expansion.

For reference purposes only if printed or downloaded. Revision: 03192019