Installation Guide

Step 5:
IMPORTANT! Use
hammer and
tapping block to
tap long edge of
plank to ensure a
tight fit. ANY
GAPPING CAN
COMPROMISE
THE LOCKING
SYSTEM!
Step 6: Attach a
scrap piece of floor
to bridge the gap
between ends of
planks.
Step 7: Tap end of
plank with hammer
and tapping block
to lock ends of
planks together.
Remove bridge
and continue
towards wall until
installing the final
plank in the row.
BE SURE TO TAP
ON EDGE OF
VINYL SO AS NOT
TO DAMAGE
LOCKING
PROFILE.
Step 8: Use
hammer and pull
bar to lock final
piece in row. Insert
spacer at end of
row. Continue
installation to final
row.
Step 9: Use
hammer and pull
bar to lock long
edges of planks on
final row.

Installation
4
For reference purposes only if printed or downloaded.