User Manual

Select the action you wish to learn, for example Power, then tap

the Learn button on the right side of the window.

The Learn infrared window will appear and you will be asked to

follow the instructions on the screen.

Remember to point your remote directly at the front of your Grid

Pad. You will see the red receiver LED in the top left. When the IR

code is received, this LED will blink once.

Once complete, the action will turn green and you can test it by

tapping Transmit now. Follow these steps for each corresponding

action that appears on your remote, then click OK to save and go

back to the Environment control window.

Grid Pad 15 Manual.indd 67Grid Pad 15 Manual.indd 67 22/09/2020 09:1422/09/2020 09:14