User Manual

63
Your Grid Pad has two built-in transmitters. A GEWA infrared
transmitter and a radio control transmitter can be found on the
rear of the device.
Changing the radio transmitter
Your Grid Pad is supplied with either an EasyWave or Z-Wave
transmitter. If you need to swap the transmitter, you can access
the port by unscrewing the panel on the back of your device.
Disconnect the installed transmitter and replace it with your
chosen transmitter. You may also need to install the appropriate
drivers for your transmitter.
5.2Transmitters
The infrared transmitter and its broadcast angle
S1
S2
HDMI
Grid Pad 15 Manual.indd 63Grid Pad 15 Manual.indd 63 22/09/2020 09:1422/09/2020 09:14